|
HP 1000-1
Hot Plate Model 1000-1
The EMS Precision Electronic Hot Plate Model 1000-1 provides an extremely accurate even temperatures across the Top surface. This is achieved by mounting heating elements into a Aluminium plate up to 22mm thick. The aluminium is also anodized to provide an excellent inert surface, to ensure not contaminating your samples.
The Hot Plate comes with a sophisticated PID temperature controller, that provides the versatility to meet the most demanding applications, yet simple to use and visually appealing and competitively priced.
Standard Features
• Accurate to ±1% across working surface • Substrate size from 10 mm to 150 mm • Temperatures from 50°C to 200°C • Vacuum ports to ensure intimate contact between substrate and hot plate (Vacuum holes on a diameter of 40mm) • Tough durable stainless steel casing • Hard Anodised Aluminium Top surface. • PID Temperature Controller with digital readout • High visibility 4 digit LED display shows temperature in °C or °F. • Delrin Safety Guard, as well as minimize heat loss at the outer edges of the heating plate. • Top Plate 200mm x 200mm, System size 350mm x 270mm x 120mm Configuration Options
• Vacuum port controlled via a timer in the PID controller and momentary switch. or Manually with a latch switch. • Top surface has small recess to allow tweezers to get under your sample to lift off. or Totally flat Top surface. • PID controller configured to Run a heat cycle of 2 Ramps and 2 dwells. or Steady state continuous single set point temperature. Tweezer Pockets to allow lifting sample
Upgrade Options
• PID controller configured to Run a heat cycle of up to 4 Ramps and 4 Dwells. • Larger Top Plate of 250mm x 250mm, System size 430mm x 350mm x 150mm • Increased Maximum Temperature capability up to 250°C • Add Lift Pins then please view Hot Plate Model 1000-3 Info….. |